• BLUE CHIP SERIES® SEVERE DUTY / AUTOMOTIVE DUTY MOTORS
• NEMA PREMIUM® XRI® MOTORS IEEE-841
• TOTALLY ENCLOSED, RIGID BASE, THREE PHASE
• APPLICATIONS:
For extreme applications in the process industries such as chemical plants, pulp and
paper mills, refineries, above-ground mines, food processing, foundries, and other
severe duty environments where long life and ultra-high efficiency are required.
Guaranteed efficiencies offer an eXtra return on your investment when using these
premium efficiency motors on high cycle or long run time applications.
• FEATURES:
• Meets or exceeds NEMA Premium® efficiencies
• NEMA Premium models are in compliance with EISA 2007
• Meets IEEE-841 standard for severe duty motor applications
• Bearing current protection (BCP), as noted
• Blue Chip Series® motor quality, 100% cast iron construction
for rigidity and reduced vibration
• Inpro/Seal® VBX® bearing isolators on drive end shaft
extension TENV and on both ends of TEFC
• Provisions to add stub shaft for an encoder
(182T-449T, TEFC only)
• Internal and external epoxy paint
• MAX GUARD® motor Class F insulation system
• Constant torque speed range is listed in CT speed range
column
• 1.15 service factor on sinewave, 1.0 service factor
on IGBT power
• Bearing caps (254T and larger)
• Precision balanced to .08”/sec
• Extended grease tubes, regreasable in service
• Brass drain and breather
• Meets General Motors® GM® 7E-TA automotive duty
specification
• Meets IEEE45 USCG marine duty, API RPI4F for offshore
platforms, IP56
• Meets NEMA® MG1 - 1.26.6 waterproof specification
• BCP (-P) models are not Hazardous Duty®
motors certified for Division 2 locations
• Hazardous Duty® motor division 2 CSA certification nameplate
• Division 2 / zone 2 class I (gases), groups A, B, C, D
• Meets temperature code T2B
• Actual test and vibration data supplied with each motor
• Ball bearings (except as noted)
• UL recognized (through 449T) and CSA certified and
CE marked
• Five year warranty
• Model 365THFS19086